using Epoxy Coatings to the Garage floor

Many times we don’t think about our garages or pay much focus on their appearance. They are simply just a spot to park the cars and store the excess boxes of Christmas decorations and such. However, like any other room in your own home your garage floor must be taken care and attention of.
Due to the utilize it gets, coupled with normal water, gas and oil that will unavoidable be spilled upon it, garage floors can simply become broken and get started to break apart after a few years useful. Epoxy finish is one answer to your garage flooring challenge. Epoxy coating applies a part of sealant and protectant to your concrete garage floor to make it withstand staining, moisture problems and helps it maintain its appearance.
Installing epoxy floor takes a little up-front planning before beginning. The main step in the procedure is ensuring the ground you will apply the epoxy covering onto is free of moisture, residual color and does not have a cement sealer or other concluding put on it.
To test for moisture, take a sheet of vinyl and take it to a 3-feet x 3-foot area using masking tape. Keep it there for about two days and nights and then remove and check for any moisture collecting privately of the clear plastic facing the floor. If moisture is present, than an epoxy floors layer is not suited as epoxy requires a dried up surface to properly relationship with the floor.
Next, we’ll test to ensure the flooring does not have a sealant already put on it. This test will also check for the presence of oils in the cement as well. Take a cup of drinking water and put it directly onto the existing flooring. It should soak in to the floor in a reasonable amount of time. If it beads or maybe sits together with the flooring then your flooring has probably already been sealed or is made up of oil pollutants. Epoxy floor coverings is not well suited for cement floors that have already been covered or contain any kind of engine oil residue as you won’t bond.
Finally, if you are willing to spend several months testing an area of your storage floor for suitability to setting up epoxy floor coverings you can coloring a small area with regular, oil-based teeth enamel. If this test area endures for several a few months then chances are an epoxy layer can last as well. However, if you decide to proceed with applying the epoxy layer you will need to eliminate this enamel layer that may require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *