Awesome garage area for Epoxy System

If you’ve ever before considered utilizing a storage floor epoxy system to protect and improve the look of your garage floor, there are many things you need to understand before purchasing one. Most home improvement stores take epoxy floor products designed for the do-it-yourselfer and you might have heard differing viewpoints how well they work. Some will say it’s a great product among others will tell you not to spend your money. Well, there is usually an easy explanation as to the reasons the product fails for a few floors.
One reason behind failure is not every concrete floor is perfect for making use of an epoxy covering. Many flooring have too much hydrostatic pressure, indicating water moves from the under the slab up to the surface in an activity called capillary action. Moisture content then collects on the top, which breaks the relationship between the cement and the epoxy cover. If the floor “sweats” even though it’s dry exterior or there are areas that seem to stay damp for extended periods of time, then an epoxy finish will almost certainly fail. It will gradually chip and flake away. Even if you don’t think there’s a moisture problem, it’s wise to apply an efflorescence or sodium blocker prior to the epoxy. This will help prevent moisture content from causing problems.

The most possible reason for failing is poor surface preparation. The ground must be completely clean and stripped of most other coatings. Any discolorations or foreign chemicals (engine oil, grease, coloring, etc.) will prevent adequate bonding between your concrete and epoxy, resulting in chipping and flaking. Most companies will apply a jacket of sealer to a car port floor after set up. Normally it takes several years for the sealer to wear off completely. This sealer must be removed for epoxy to last. Although acidity etching can be an important step, you won’t remove sealer and most stains. Etching will only start the skin pores of bare cement, therefore you should do all cleaning and stripping before etching with acid solution.

Before purchasing a car port floor epoxy system, you need to first decide if your floor is right for this. If it sweats often or there are areas that are constantly wet, then just forget about it. Make sure that you are prepared to take time to prep the floor properly, as this is actually the most critical part. In addition, it helps to put a couple of jackets of clear concrete sealer on top to provide as a wear layer. Water structured acrylic sealers are ideal for indoor personal use. Despite any bad reviews you’ve heard about the do-it-yourself garage area floor epoxy system, it can be a successful project whether it’s done correctly.

Leave a Reply

Your email address will not be published. Required fields are marked *