Applying Epoxy flooring to any Garage floor

Often we don’t think about our garages or pay much focus on their appearance. They are simply just a place to park the vehicles and store the extra boxes of Christmas designs and such. However, like any other room in your house your garage area floor must be taken attention of.
Because of the put it to use gets, combined with water, gas and olive oil that will inescapable be spilled upon it, garage floor can certainly become broken and get started to break apart after a few years of use. Epoxy coating is one means to fix your garage floor coverings challenge. Epoxy finish applies a part of sealant and protectant to your concrete garage area floor to help it withstand staining, moisture problems and helps it maintain its appearance.
Installing epoxy floor coverings requires a little up-front planning before beginning. The main step in the process is ensuring the floor you are going to apply the epoxy finish onto is free from moisture, residual car paint and does not have a cement sealer or other concluding applied to it.
To check for moisture, have a sheet of plastic material and take it to a 3-ft . x 3-foot area using masking tape. Keep it there for about two times and then remove and check for any moisture collecting on the side of the plastic facing the ground. If moisture is present, than an epoxy floor finish is not appropriate as epoxy needs a dry surface to properly bond with the floors.
Next, we’ll test to ensure the flooring doesn’t have a sealant already applied to it. This test will also check for the occurrence of natural oils in the cement as well. Take a cup of normal water and pour it straight onto the prevailing flooring. It should soak in to the floor in a reasonable timeframe. If it beads or perhaps sits on top of the flooring then the floor coverings has probably recently been sealed or is made up of oil contaminants. Epoxy floor is not ideal for cement floors that have already been sealed or contain any kind of essential oil residue as it will not bond.
Finally, if you are willing to spend almost a year testing a location of your storage area floor for suitability to putting in epoxy floor coverings you can coloring a tiny area with regular, oil-based enamel. If this test area will last for several calendar months then chances are an epoxy coating will last as well. However, if you decide to proceed with making use of the epoxy coating you’ll need to eliminate this enamel layer that may require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *