using Epoxy paint to a Garage floor

Many times we don’t think about our garages or pay much focus on their appearance. They are simply just a location to park the autos and store the extra boxes of Christmas accessories and such. However, like any other room in your own home your storage floor must be taken attention of.
Because of the put it to use gets, coupled with drinking water, gas and essential oil that will inescapable be spilled upon it, garage floor coverings can certainly become broken and commence to fall apart over time useful. Epoxy coating is one answer to your garage flooring challenge. Epoxy covering applies a layer of sealant and protectant to your concrete storage floor to make it avoid staining, moisture problems and helps it maintain its appearance.
Installing epoxy floor coverings takes a little up-front planning before beginning. The most important step in the process is making sure that the ground you will apply the epoxy covering onto is free of moisture, residual color and doesn’t have a concrete sealer or other finishing put on it.
To test for moisture, have a sheet of plastic and take it to a 3-ft . x 3-foot area using masking tape. Keep it there for about two days and nights and then remove and check for any moisture collecting on the side of the clear plastic facing the floor. If moisture is present, than an epoxy floor coverings coating is not suited as epoxy needs a dry out surface to properly relationship with the floor coverings.
Next, we’ll test to make sure the flooring does not have a sealant already put on it. This test will also check for the presence of oils in the concrete as well. Have a cup of normal water and put it directly onto the existing flooring. It will soak in to the floor in an acceptable timeframe. If it beads or simply sits together with the flooring then your floor has probably recently been sealed or consists of oil contaminants. Epoxy flooring is not well suited for cement floors which may have already been closed or contain any type of oil residue as it will not bond.
Finally, if you are willing to spend several months testing a location of your storage floor for suitability to putting in epoxy floor you can paint a little area with regular, oil-based teeth enamel. If this test area lasts for several weeks then chances are an epoxy coating will last as well. However, if you decide to proceed with making use of the epoxy finish you’ll need to eliminate this enamel layer that will require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *