using Epoxy flooring to the Garage Flooring

Often we don’t think about our garages or pay much focus on the look of them. They are simply just a location to park the cars and store the extra boxes of Holiday designs and such. However, like any other room in your house your storage floor must be taken care and attention of.
Due to the make use of it gets, coupled with drinking water, gas and olive oil that will inevitable be spilled after it, garage floor can certainly become harmed and begin to fall apart after a few years useful. Epoxy finish is one answer to your garage flooring challenge. Epoxy layer applies a layer of sealant and protectant to your concrete storage floor to make it avoid staining, moisture problems and helps it maintain steadily its appearance.
Installing epoxy floor coverings takes a little up-front prep before beginning. The main step in the procedure is ensuring the floor you are going to apply the epoxy layer onto is free of moisture, residual paint and does not have a concrete sealer or other finishing applied to it.
To test for moisture, have a sheet of vinyl and take it to a 3-feet x 3-foot area using masking tape. Keep it there for about two days and then remove and check for any moisture collecting privately of the vinyl facing the floor. If moisture exists, than an epoxy floor covering is not suitable as epoxy requires a dry surface to properly connection with the floor.
Next, we’ll test to make certain the flooring does not have a sealant already applied to it. This test will also look for the occurrence of natural oils in the cement as well. Have a cup of normal water and pour it straight onto the prevailing flooring. It will soak in to the floor in an acceptable amount of time. If it beads or simply sits together with the flooring then your floor coverings has probably recently been sealed or includes oil contaminants. Epoxy flooring is not ideal for cement floors which may have already been covered or contain any type of petrol residue as it will not bond.
Finally, if you are prepared to spend almost a year testing a location of your garage floor for suitability to installing epoxy floor coverings you can coloring a little area with regular, oil-based enamel. If this test area endures for several months then it is likely an epoxy covering can last as well. However, if you opt to proceed with applying the epoxy finish you will need to eliminate this enamel layer that will require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *