using Epoxy Coatings to a Garage floors

Often we don’t believe about our garages or pay much focus on the look of them. They are merely a destination to park the automobiles and store the excess boxes of Holiday designs and such. However, like any other room in your house your storage floor needs to be taken attention of.
Due to the put it to use gets, combined with water, gas and essential oil that will inevitable be spilled after it, garage floors can simply become harmed and get started to fall apart after a few years useful. Epoxy covering is one treatment for your garage floors challenge. Epoxy coating applies a part of sealant and protectant to your concrete garage area floor to make it resist staining, moisture problems and helps it maintain its appearance.
Installing epoxy floors requires a little up-front prep before beginning. The most important step in the procedure is ensuring the floor you are going to apply the epoxy layer onto is free from moisture, residual color and doesn’t have a cement sealer or other completing put on it.
To check for moisture, have a sheet of vinyl and take it to a 3-feet x 3-foot area using masking tape. Keep it there for about two days and then remove and check for any moisture collecting on the side of the plastic material facing the ground. If moisture is present, than an epoxy flooring finish is not suitable as epoxy needs a dried up surface to properly relationship with the flooring.
Next, we’ll test to make certain the flooring doesn’t have a sealant already applied to it. This test will also look for the presence of oils in the cement as well. Take a cup of normal water and pour it straight onto the existing flooring. It should soak in to the floor in a reasonable timeframe. If it beads or simply sits on top of the flooring then the floors has probably recently been sealed or includes oil impurities. Epoxy flooring is not suited to cement floors which may have already been sealed or contain any kind of petrol residue as you won’t bond.
Finally, if you are willing to spend almost a year testing a location of your garage floor for suitability to installing epoxy floor coverings you can color a tiny area with regular, oil-based teeth enamel. If this test area endures for several months then it is likely an epoxy layer will last as well. However, if you decide to proceed with making use of the epoxy finish you will need to remove this enamel finish that will require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *