using Epoxy Coatings to the Garage floor

Many times we don’t believe about our garages or pay much attention to their appearance. They are merely a location to park the automobiles and store the excess boxes of Christmas decorations and such. However, like any other room in your own home your car port floor needs to be taken attention of.
Because of the use it gets, combined with drinking water, gas and olive oil that will inescapable be spilled upon it, garage floor can certainly become ruined and commence to break apart over time useful. Epoxy layer is one means to fix your garage floor challenge. Epoxy finish applies a layer of sealant and protectant to your concrete garage area floor to help it resist staining, moisture problems and helps it maintain steadily its appearance.
Installing epoxy floor requires a little up-front prep before beginning. The main step in the procedure is making sure that the ground you will apply the epoxy covering onto is free of moisture, residual color and does not have a concrete sealer or other concluding applied to it.
To check for moisture, have a sheet of clear plastic and take it to a 3-foot x 3-foot area using masking tape. Keep it there for about two times and then remove and look for any moisture collecting privately of the vinyl facing the ground. If moisture exists, than an epoxy floor finish is not suitable as epoxy requires a dried surface to properly bond with the floor.
Next, we’ll test to be sure the flooring does not have a sealant already applied to it. This test will also check for the presence of oils in the concrete as well. Take a cup of normal water and put it directly onto the prevailing flooring. It will soak in to the floor in a reasonable timeframe. If it beads or just sits together with the flooring then your floor has probably already been sealed or has oil pollutants. Epoxy floors is not well suited for cement floors which have already been covered or contain any kind of oil residue as you won’t bond.
Finally, if you are prepared to spend almost a year testing a location of your garage area floor for suitability to putting in epoxy floor coverings you can color a little area with regular, oil-based teeth enamel. If this test area endures for several months then it is likely an epoxy coating can last as well. However, if you opt to proceed with applying the epoxy covering you’ll need to eliminate this enamel covering that will require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *