application of Epoxy paint to Your Garage surface

Often we don’t think about our garages or pay much focus on their appearance. They are merely a place to park the cars and store the extra boxes of Christmas decor and such. However, like any other room in your house your storage floor needs to be taken care and attention of.
Due to the make use of it gets, coupled with water, gas and engine oil that will inescapable be spilled upon it, garage floors can easily become ruined and commence to fall apart after a few years of use. Epoxy coating is one treatment for your garage floor challenge. Epoxy finish applies a level of sealant and protectant to your concrete storage area floor to help it withstand staining, moisture problems and helps it maintain steadily its appearance.
Installing epoxy floors requires a little up-front preparation before beginning. The most important step in the procedure is ensuring the floor you will apply the epoxy covering onto is free of moisture, residual color and doesn’t have a concrete sealer or other finishing put on it.
To test for moisture, take a sheet of plastic and take it to a 3-ft . x 3-foot area using masking tape. Keep it there for about two times and then remove and check for any moisture collecting on the side of the clear plastic facing the ground. If moisture is present, than an epoxy flooring layer is not ideal as epoxy requires a dried out surface to properly bond with the floors.
Next, we’ll test to ensure the flooring does not have a sealant already applied to it. This test will also check for the existence of natural oils in the concrete as well. Have a cup of water and pour it straight onto the existing flooring. It will soak in to the floor in a reasonable amount of time. If it beads or perhaps sits together with the flooring then your floor coverings has probably recently been sealed or consists of oil pollutants. Epoxy flooring is not ideal for cement floors that have already been closed or contain any type of olive oil residue as you won’t bond.
Finally, if you are willing to spend almost a year testing an area of your car port floor for suitability to installing epoxy floor coverings you can paint a tiny area with regular, oil-based enamel. If this test area endures for several months then chances are an epoxy layer will last as well. However, if you decide to proceed with making use of the epoxy covering you will need to remove this enamel finish that will require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *