using Epoxy paint to the Garage floors

Often we don’t believe about our garages or pay much focus on the look of them. They are merely a spot to park the cars and store the extra boxes of Christmas adornments and such. However, like any other room in your own home your car port floor must be taken treatment of.
Due to the put it to use gets, coupled with water, gas and olive oil that will unavoidable be spilled upon it, garage flooring can easily become broken and start to fall apart over time of use. Epoxy coating is one way to your garage floor challenge. Epoxy finish applies a coating of sealant and protectant to your concrete storage area floor to help it withstand staining, moisture problems and helps it maintain its appearance.
Installing epoxy floor coverings takes a little up-front preparation before beginning. The most important step in the process is ensuring the ground you are going to apply the epoxy covering onto is free from moisture, residual paint and doesn’t have a cement sealer or other completing put on it.
To test for moisture, have a sheet of plastic material and take it to a 3-ft . x 3-foot area using masking tape. Keep it there for approximately two days and then remove and look for any moisture collecting privately of the clear plastic facing the ground. If moisture exists, than an epoxy flooring covering is not suitable as epoxy requires a dry out surface to properly connection with the floor coverings.
Next, we’ll test to make certain the flooring doesn’t have a sealant already put on it. This test will also look for the occurrence of natural oils in the cement as well. Take a cup of water and put it immediately onto the prevailing flooring. It will soak into the floor in a reasonable timeframe. If it beads or maybe sits on top of the flooring then your floor coverings has probably recently been sealed or is made up of oil pollutants. Epoxy floor coverings is not well suited for cement floors which may have already been closed or contain any type of oil residue as you won’t bond.
Finally, if you are willing to spend almost a year testing an area of your storage area floor for suitability to setting up epoxy flooring you can color a tiny area with regular, oil-based teeth enamel. If this test area will last for several weeks then it is likely an epoxy covering can last as well. However, if you decide to proceed with making use of the epoxy layer you will need to eliminate this enamel layer that will require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *