Applying Epoxy flooring to the Garage floors

Many times we don’t think about our garages or pay much focus on their appearance. They are merely a location to park the cars and store the extra boxes of Xmas accessories and such. However, like any other room in your house your storage floor must be taken care of.
Because of the utilize it gets, combined with drinking water, gas and olive oil that will inevitable be spilled upon it, garage floor can simply become broken and start to fall apart after a few years of use. Epoxy finish is one answer to your garage flooring challenge. Epoxy coating applies a layer of sealant and protectant to your concrete storage floor to help it withstand staining, moisture problems and helps it maintain steadily its appearance.
Installing epoxy floor coverings takes a little up-front prep before beginning. The main step in the process is ensuring the ground you are going to apply the epoxy coating onto is free of moisture, residual color and does not have a concrete sealer or other completing applied to it.
To check for moisture, take a sheet of vinyl and take it to a 3-foot x 3-foot area using masking tape. Keep it there for about two days and nights and then remove and look for any moisture collecting on the side of the clear plastic facing the ground. If moisture is present, than an epoxy floor layer is not suited as epoxy needs a dried out surface to properly relationship with the floors.
Next, we’ll test to make sure the flooring does not have a sealant already put on it. This test will also check for the presence of oils in the cement as well. Have a cup of drinking water and put it straight onto the existing flooring. It should soak in to the floor in a reasonable timeframe. If it beads or maybe sits together with the flooring then your floors has probably already been sealed or includes oil contaminants. Epoxy floor coverings is not suitable for cement floors which may have already been covered or contain any kind of engine oil residue as you won’t bond.
Finally, if you are prepared to spend several months testing an area of your storage area floor for suitability to setting up epoxy floor coverings you can coloring a little area with regular, oil-based enamel. If this test area will last for several months then chances are an epoxy finish will last as well. However, if you opt to proceed with applying the epoxy coating you will need to eliminate this enamel finish that will require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *