using Epoxy paint to the Garage Flooring

Often we don’t believe about our garages or pay much focus on their appearance. They are simply just a destination to park the autos and store the extra boxes of Xmas adornments and such. However, like any other room in your own home your garage floor must be taken care of.
Due to the make use of it gets, combined with normal water, gas and oil that will inevitable be spilled after it, garage floor can certainly become destroyed and commence to break apart after a few years of use. Epoxy covering is one method for your garage floor coverings challenge. Epoxy coating applies a part of sealant and protectant to your concrete garage area floor to help it withstand staining, moisture problems and helps it maintain its appearance.
Installing epoxy flooring requires a little up-front planning before beginning. The most important step in the procedure is ensuring the floor you will apply the epoxy covering onto is free from moisture, residual coloring and does not have a concrete sealer or other concluding put on it.
To check for moisture, have a sheet of clear plastic and take it to a 3-feet x 3-foot area using masking tape. Keep it there for about two days and nights and then remove and look for any moisture collecting on the side of the clear plastic facing the ground. If moisture is present, than an epoxy floors finish is not ideal as epoxy requires a dried up surface to properly connection with the floors.
Next, we’ll test to ensure the flooring does not have a sealant already put on it. This test will also check for the presence of natural oils in the concrete as well. Have a cup of drinking water and put it immediately onto the existing flooring. It will soak in to the floor in an acceptable amount of time. If it beads or perhaps sits on top of the flooring then the floor coverings has probably already been sealed or is made up of oil contaminants. Epoxy floor is not suitable for cement floors that have already been covered or contain any kind of oil residue as it will not bond.
Finally, if you are willing to spend several months testing an area of your garage area floor for suitability to putting in epoxy floor coverings you can coloring a little area with regular, oil-based teeth enamel. If this test area continues for several months then chances are an epoxy layer can last as well. However, if you decide to proceed with making use of the epoxy finish you’ll need to eliminate this enamel finish that may require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *