Applying Epoxy flooring to Your Garage Flooring

Often we don’t believe about our garages or pay much attention to the look of them. They are merely a spot to park the automobiles and store the extra boxes of Christmas adornments and such. However, like any other room in your house your garage floor needs to be taken attention of.
Because of the make use of it gets, combined with normal water, gas and engine oil that will inescapable be spilled after it, garage floors may easily become damaged and get started to break apart after a few years useful. Epoxy covering is one way to your garage flooring challenge. Epoxy covering applies a coating of sealant and protectant to your concrete garage floor to help it withstand staining, moisture problems and helps it maintain steadily its appearance.
Installing epoxy floor requires a little up-front prep before beginning. The most important step in the procedure is ensuring the ground you are going to apply the epoxy covering onto is free of moisture, residual color and does not have a cement sealer or other finishing put on it.
To check for moisture, take a sheet of vinyl and take it to a 3-ft . x 3-foot area using masking tape. Keep it there for about two days and then remove and look for any moisture collecting privately of the vinyl facing the ground. If moisture exists, than an epoxy flooring coating is not appropriate as epoxy requires a dried surface to properly relationship with the floor coverings.
Next, we’ll test to ensure the flooring doesn’t have a sealant already put on it. This test will also check for the presence of natural oils in the concrete as well. Have a cup of water and put it directly onto the existing flooring. It should soak into the floor in an acceptable amount of time. If it beads or maybe sits together with the flooring then your floor coverings has probably already been sealed or includes oil pollutants. Epoxy floors is not well suited for cement floors that contain already been closed or contain any kind of olive oil residue as it will not bond.
Finally, if you are willing to spend almost a year testing a location of your storage area floor for suitability to installing epoxy flooring you can coloring a tiny area with regular, oil-based teeth enamel. If this test area is maintained for several a few months then it is likely an epoxy covering will last as well. However, if you decide to proceed with applying the epoxy covering you will need to eliminate this enamel coating that will require sanding.

Leave a Reply

Your email address will not be published. Required fields are marked *