If you’ve ever considered utilizing a storage area floor epoxy system to safeguard and improve the look of your car port floor, there are a few things you need to know before purchasing one. Most home improvement stores take epoxy floor products suitable for the do-it-yourselfer and you might have heard differing viewpoints about how well they work. Some will say it’s a great product and others will tell you not to waste your money. Well, you can find usually an easy explanation as to why this product fails for some floors.
One reason for failure is don’t assume all concrete floor is ideal for making use of an epoxy layer. Many floor surfaces have too much hydrostatic pressure, meaning water moves from the under the slab up to the surface in an activity called capillary action. Moisture content then gathers on the surface, which breaks the bond between the concrete and the epoxy coat. If the ground “sweats” even when it’s dry outside the house or there are areas that appear to stay damp for long periods of time, then an epoxy layer will likely fail. It’ll slowly but surely chip and flake away. Even though you don’t think there’s a moisture problem, it’s a good idea to use an efflorescence or salt blocker prior to the epoxy. This can help prevent moisture from leading to problems.
The most probable reason for inability is inappropriate surface preparation. The floor must be completely clean and stripped of most other coatings. Any staining or foreign substances (petrol, grease, coloring, etc.) will prevent sufficient bonding between your cement and epoxy, resulting in chipping and flaking. Most contractors will apply a cover of sealer to a storage area floor after unit installation. Normally it takes several years for the sealer to wear off completely. This sealer must be removed for epoxy to last. Although acidity etching is an important step, you won’t remove sealer and most stains. Etching is only going to start the pores of bare concrete, therefore you must do all cleaning and stripping before etching with acidity.
Before investing in a storage area floor epoxy system, you need to first decide if your floor is right for it. If it sweats often or there are areas that are constantly moist, then forget about it. Be sure that you are willing to take time to prep the ground properly, as this is actually the most significant part. It also really helps to put a couple of jackets of clear cement sealer at the top to provide as a wear jacket. Water founded acrylic sealers are perfect for indoor residential use. Despite any bad reviews you’ve found out about the do-it-yourself storage area floor epoxy system, it’s rather a successful project whether it’s done correctly.