Do-It-Yourself garage area Floors Epoxy System

If you’ve ever before considered utilizing a storage floor epoxy system to protect and improve the look of your garage area floor, there are many things you have to know before purchasing one. Most home improvement stores take epoxy floor sets made for the do-it-yourselfer and you’ve probably heard differing views about how well they work. Some will say it’s a fantastic product and more will let you know not to squander your cash. Well, you can find usually a fairly easy explanation as to why the product fails for some floors.
One reason behind failure is not every concrete floor is well suited for making use of an epoxy covering. Many floors have too much hydrostatic pressure, meaning water moves from the under the slab up to the surface in an activity called capillary action. Water then collects on the surface, which breaks the bond between the concrete and the epoxy coating. If the floor “sweats” even though it’s dry outdoors or there are areas that appear to stay moist for long periods of time, then an epoxy covering will likely fail. It’ll slowly but surely chip and flake away. Even though you don’t think there is a moisture problem, it’s a good idea to use an efflorescence or sodium blocker prior to the epoxy. This can help prevent dampness from creating problems.

The most probable reason for failing is poor surface preparation. The floor must be completely clean and stripped of all other coatings. Any spots or foreign chemicals (petrol, grease, car paint, etc.) will prevent adequate bonding between the concrete and epoxy, resulting in chipping and flaking. Most contractors will apply a layer of sealer to a garage area floor after set up. It can take many years for the sealer to wear off completely. This sealer must be removed for epoxy to last. Although acid etching can be an important step, it will not remove sealer & most stains. Etching is only going to start the pores of bare cement, therefore you should do all cleaning and stripping before etching with acidity.

Before purchasing a storage floor epoxy system, you will need to first decide if your floor is right for it. If it sweats often or there are areas that are constantly wet, then forget about it. Make sure that you are prepared to take time to prep the ground properly, as this is actually the most significant part. In addition, it really helps to put one or two coats of clear concrete sealer at the top to provide as a wear coat. Water founded acrylic sealers are suitable for indoor domestic use. Despite any bad reviews you’ve heard about the do-it-yourself storage area floor epoxy system, it can be a successful project if it’s done correctly.

Leave a Reply

Your email address will not be published. Required fields are marked *