If you’ve ever considered utilizing a storage floor epoxy system to safeguard and enhance the look of your storage floor, there are many things you have to know before purchasing one. Most diy stores take epoxy floor packages designed for the do-it-yourselfer and you’ve probably heard differing thoughts how well they work. Some will say it’s an excellent product as well as others will let you know not to waste materials your money. Well, there may be usually a simple explanation as to the reasons this product fails for some floors.
One reason for failure is don’t assume all concrete floor is ideal for making use of an epoxy covering. Many flooring have too much hydrostatic pressure, meaning water steps from the under the slab up to the surface in an activity called capillary action. Dampness then collects on the top, which breaks the connection between the concrete and the epoxy layer. If the floor “sweats” even when it’s dry outside the house or there are areas that seem to be to stay damp for long periods of time, then an epoxy coating will likely fail. It’ll little by little chip and flake away. Even if you don’t think there’s a moisture problem, it’s wise to apply an efflorescence or salt blocker prior to the epoxy. This will help prevent dampness from leading to problems.
The most probable reason for failing is incorrect surface preparation. The floor must be completely clean and stripped of most other coatings. Any stains or foreign chemicals (engine oil, grease, car paint, etc.) will prevent enough bonding between your concrete and epoxy, resulting in chipping and flaking. Most contractors will apply a coating of sealer to a storage floor after installation. It can take several years for the sealer to wear off completely. This sealer must be removed for epoxy to previous. Although acid etching can be an important step, it will not remove sealer and most stains. Etching will only start the pores of bare cement, therefore you should do all cleaning and stripping before etching with acidity.
Before purchasing a garage area floor epoxy system, you need to first decide if your floor is right for this. If it sweats often or there are areas that are constantly damp, then just forget about it. Make sure that you are willing to take time to prep the ground properly, as this is actually the most significant part. In addition, it helps to put a couple of coats of clear concrete sealer on top to provide as a wear coat. Water founded acrylic sealers are well suited for indoor personal use. Despite any bad reviews you’ve heard about the do-it-yourself storage area floor epoxy system, it can be a successful project whether it’s done correctly.